When using core drills, a core drill is a reliable tool for core drilling in hard building materials such as concrete, masonry or asphalt.
It can also successfully drill very wide holes up to 255 millimeters in diameter.
Thanks to the integrated water cooling system, the device works with optimal working parameters, thus guaranteeing a longer life of the drills.
The high protection of the user and the drilling machine is ensured by a portable circuit breaker, which is why this core drill is ideally used on construction sites.
The core drill with stand handles both drilling in concrete and reinforced concrete, cement, masonry, asphalt and natural stone. You can drill both horizontally and vertically.
When drilling horizontally or when it is necessary to ensure extremely high stability of the device, you will use anchor bolts to achieve maximum adhesion to the floor and walls.
The drilling protection is ensured by the water cooling system, integrated by means of the ½ “connection. The delivery also includes a supply hose with a length of 2 meters.
Water cooling contributes to the longer life of diamond drills and speeds up the working pace. This eliminates the need for external cooling.
The precise guidance of the stand allows drilling according to the properties of the material. With a generous construction length of 50 centimeters, the stand allows drilling even very deep holes in a variety of materials.
The guide of the core drilling machine is facilitated by a sliding lever, with which it is possible to precisely dispense the force exerted on the spindle and the diamond crown.
- the machine is suitable for wet and dry drilling
- integrated circuit breaker in the supply cable
- professional construction withstanding high load
Parameters:
Supply voltage: 230 V / 50 Hz
Power: 4450W
Maximum drilling width: 255 mm
speed: 580 rpm
Integrated FI (residual current circuit breaker): 10 mA
Overall height: approximately 30 inches (75 cm)
Packing:
- core drill
- 2x adjusting keys + hex
- water supply hose
- replacement carbons
- fixing screws 5x
- manual
- FREE diamond drill 108mm / 400mm
It can also successfully drill very wide holes up to 255 millimeters in diameter.
Thanks to the integrated water cooling system, the device works with optimal working parameters, thus guaranteeing a longer life of the drills.
The high protection of the user and the drilling machine is ensured by a portable circuit breaker, which is why this core drill is ideally used on construction sites.
The core drill with stand handles both drilling in concrete and reinforced concrete, cement, masonry, asphalt and natural stone. You can drill both horizontally and vertically.
When drilling horizontally or when it is necessary to ensure extremely high stability of the device, you will use anchor bolts to achieve maximum adhesion to the floor and walls.
The drilling protection is ensured by the water cooling system, integrated by means of the ½ “connection. The delivery also includes a supply hose with a length of 2 meters.
Water cooling contributes to the longer life of diamond drills and speeds up the working pace. This eliminates the need for external cooling.
The precise guidance of the stand allows drilling according to the properties of the material. With a generous construction length of 50 centimeters, the stand allows drilling even very deep holes in a variety of materials.
The guide of the core drilling machine is facilitated by a sliding lever, with which it is possible to precisely dispense the force exerted on the spindle and the diamond crown.
- the machine is suitable for wet and dry drilling
- integrated circuit breaker in the supply cable
- professional construction withstanding high load
Parameters:
Supply voltage: 230 V / 50 Hz
Power: 4450W
Maximum drilling width: 255 mm
speed: 580 rpm
Integrated FI (residual current circuit breaker): 10 mA
Overall height: approximately 30 inches (75 cm)
Packing:
- core drill
- 2x adjusting keys + hex
- water supply hose
- replacement carbons
- fixing screws 5x
- manual
- FREE diamond drill 108mm / 400mm
